RSS | Advanced Search | Site Map | Text Size a- A+
City of Colorado Springs
We Create Community

NOTE - THE NOTED DISAPPROVED ITEMS MAY NOT CONSTITUTE A COMPLETE LIST OF VIOLATIONS. THE DESIGNER IS TO CONDUCT A COMPLETE RE-REVIEW OF THE PLANS FOR ADDITIONAL VIOLATIONS OF THE STANDARD COMMENTS AND INCORRECT INFORMATION PRIOR TO RESUBMITTING.

 System plans must be picked up within 30 days. All system plans left longer than 30 days will be discarded as abandoned.

RICKS RODS AND RESTORATION - UNIT 110
03405 PROSPECT ST

Review DateStatusComment(s)
2/27/2013 FYIRESUBMITTED: The plans have been re-submitted, and the disapproved issues have been addressed as follows: APPROVED ******************** SEE ELECTRONIC DOCUMENTS. **PLEASE NOTE** ALL COMMENTS FOUND ON PREVIOUS PLAN REVIEWS REMAIN ENFORCEABLE UNLESS OTHERWISE NOTED IN THIS REVIEW. 1) Plan reviewer met with Rick (owner) and owner representative (Dale) 2/27/13. Reviewed all resubmittals and chemical inventory. Approved. 2) Splice sheet MO.1 dated 2/25/13 shows roof termination exhaust locations. compliant with 30 ft. to property line. OK Owner will submit for PPRBD Mechanical for re-review and submittal of revised splice 3) Chemical inventory below permit thresholds. NO Hazardous Materials annual operational permit required. 8 gal = flam com liquids in Flammable Liquid Storage Cabinet 307 = Oxygen (oxydizing gas) 336 = Argon (inert-asphyxiant) 150 cf = acetylene (flam gas) 4) CROSS DRAFT BOOTH. OK. 5) Suppression system and permit through ACME and shall be submitted to D Withee of CSFD OK. Additional duct head to be added due to duct extension at roof. OK
2/22/2013 FYI*****(STANDARD COMMENT) This project is: Vacant Lease Space, 3405 Prospect St, Suite 110: interior finish to create new suite - new paint booth Date of Plans:1.4.13 You can access our web site for the latest fire department plan review comments: 1. From www.pprbd.org, select PLAN REVIEW then FIND PLANS next COLORADO SPRINGS 2. Scroll down to the correct address. You may then select APPROVED/DISAPPROVED to view comments associated with that particular project.
DisapprovedThe PPRBD Code Study Form (Section 4.0) does NOT indicate the scope of work includes hazardous materials. Yet, the CSFD hazmat Triage form identifies hazardous materials and activities. This form instructs user to provide a Hazardous Material Inventory Statement. This Inventory Statement was within the submitted plan set, however, INCOMPLETE AND INCORRECT DATA SUBMITTED Hazardous materials inventory statement. When required by the chief, each application for a permit shall include a hazardous materials inventory statement (HMIS). International Fire Code - HAZARDOUS MATERIALS MANAGEMENT PLANS AND HAZARDOUS MATERIALS INVENTORY STATEMENTS section 2.1 provides guidance on the minimum information required to complete an HMIS. A separate HMIS shall be provided for each building, including its appurtenant structures, and each exterior facility in which hazardous materials are stored. The hazardous materials inventory statement shall list by hazard class all hazardous materials stored. The hazardous materials inventory statement shall include the following information for each hazardous material listed: 1. Hazard class. 2. Common or trade name. 3. Chemical name, major constituents and concentrations if a mixture. If a waste, the waste category. 4. Chemical Abstract Service number (CAS number) found in 29 Code of Federal Regulations (C.F.R.). 5. Whether the material is pure or a mixture, and whether the material is a solid, liquid or gas. 6. Maximum aggregate quantity stored at any one time. 7. Storage conditions related to the storage type, temperature and pressure. If, during the plan review process, changes to the HMIS are identified by the owner, user, subcontractor, or submitter of the HMIS then the following guidance is provided on when to notify CSFD. An amended HMIS shall be provided within 30 days of the storage of any hazardous materials which changes or adds a hazard class or which is sufficient in quantity to cause an increase in the quantity which exceeds 5 percent for any hazard class.
DisapprovedCHEMICAL INVENTORY - DISAPPROVED. Incomplete and incorrect chemical inventory was resubmitted with the plans. RESUBMIT WITH CORRECTED CHEMICAL INVENTORY, HAZARD CLASSES AND AMOUNTS. GASES ARE NOT REPORTED AS "GALLONS" report as cubic feet, number of cylinders, NO PAINTS REPORTED NO SOLVENTS REPORTED NOTE: TRIAGE FORM IDENTIFIES THE FOLLOWING: WELDING & TORCH CUTTING AUTO REPAIR MAINTENANCE ?? TYPE PAINTS ?? COMPRESSED GASES (ARGON, OXYGEN, ACETYLENE) GASES IN CUBIC FEET, # OF CYLINDERS EACH, AND TOTAL SEE ADDITIONAL CHEMICAL INVENTORY COMMENTS BELOW. Please contact CSFD Kay Yeager, Hazardous Materials Program Coord. @ 719-385-7356 if you have questions or additional information regarding chemical inventory.
DisapprovedIndicate on the plans the locations of all hazardous materials storage as well as indicate how the hazardous materials will be stored (i.e. flam cabinets, shelves, floor, drums, etc.)
DisapprovedSPRAY BOOTH AND CABIN CUT SHEET SPECIFICATION INFORMATION MANUFACTURER: SPRAY ZONE MANUFACTURING brochure for fire suprression system indicates this is an vheicle paint spray booth, open front. Is this correct? DESCRIBE TYPE OF SPRAY BOOTH open front, etc? provide additional specification information please.
DisapprovedMIXING ROOM ATTENTION: Mixing room shall be required to be in accordance with NFPA 33 Standard, Section 8.3 (current edition) *** Mixing room is required to be designed to contain a spill; mixing room is required to be electrically classified the same as enclosed spray booths; Mixing room shall not exceed 150 sf (mixing room is 90 sf). *** NO MIXING ROOM WAS IDENTIFIED IN THIS PLAN. IS THERE A MIXING ROOM FOR THIS BOOTH?
DisapprovedThe AGGREGATE AREA of spray booths in a building shall not exceed the lesser of 10 percent of the area of any floor of a building (XXXX Sqft) or the basic area allowed for a Group H2 Occupancy without area increases, (7000 Sqft) as set forth in the Building Code (Table 503). The area of any individual spray booth in a building shall not exceed the lesser of the aggregate size limit or 1,500 square feet. EXCEPTION: One individual booth not exceeding 500 square feet. *The allowable aggregate area of spray booths in this facility is XXXX Sqft. ??? Resubmit with * Aggregate area of spray booth and aggregate area of floor of building *** RESUBMIT PLANS WITH THE COMPLETED INFORMATION AND IN ACCORDANCE WITH THE ABOVE.
Disapproved1504.7.6 Termination point. The termination point for exhaust ducts discharging to the atmosphere shall not be less than the following distances: 1. Ducts conveying explosive or flammable vapors, fumes or dusts: 30 feet (9144 mm) from the property line; 10 feet (3048 mm) from openings into the building; 6 feet (1829 mm) from exterior walls and roofs; 30 feet (9144 mm) from combustible walls or openings into the building that are in the direction of the exhaust discharge; 10 feet (3048 mm) above adjoining grade. 2. Other product-conveying outlets: 10 feet (3048 mm) from the property line; 3 feet (914 mm) from exterior walls and roofs; 10 feet (3048 mm) from openings into the building; 10 feet (3048 mm) above adjoining grade. **DISAPPROVED ATTENTION: Not shown on plans. SHOW ROOF TERMINATION POINTS ON PLANS AND DELINEATE ALL distances to property line RESUBMIT and declare compliance with the above requirement.
AttentionADDITIONAL SUBMITTALS Fire extinguishing system shall be required in accordance with Table 903.2.13, of the IFC 2009, as amended. *****ATTENTION Special hazard suppression systems shall be required to submit for plan review and necessary permits to the CSFD, Fire Systems Plans Reviewer. ****Submit plans and application to the CSFD-DRE, 2880 International Circle. You may contact Ms. Withee, CSFD, Fire Systems Plans Reviewer, at 719-385-7361 for questions or additional information. Plan reviews are based on the requirements found within the 2009 editions of the International Building Code, International Fire Code and the most recent editions of the NFPA standards as applicable. *** BROCHURE INCLUDED IN PLANS INDICATES AMEREX FIRE SUPRESSION SYSTEM, STICKER IDENTFIES ACME FIRE SAFETY.
2/22/2013 FYIATTENTION: THIS FACILITY HAS ONE CONTROL AREA: MAIN AREA - This facility in NOT constructed for H Occupancy. - Occupant shall maintain material quantities below Table thresholds:
FYIFF - {SPRAY BOOTHS - NORMAL} - (PART 2) SEPARATION between spray booths shall be not less than 3 feet, by a wall or partition, or by a greater distance as required by the chief. CLEAR SPACE around all portions of spray booths shall be readily available for cleaning, and a clear space of not less than 3 feet shall be kept free of storage or combustible materials in accordance with 2009 IFC 1504.1.2.5 (also see Exceptions to this section). LIGHT FIXTURES in spray booths are to be fixed lighting units which transmit light into the spray booth through heat-treated or hammered wire glass shall be used. Glass panels shall be arranged to minimize breakage and so that normal accumulation of residue on the exposed surface of a panel will not be raised to a dangerous temperature by heat from the source of illumination. EXIT DOORS from premanufactured paint spray booths shall not be less than 2 feet 6 inches by 6 feet 8 inches. ****Listed ETL light tubes light fixtures are identified on plan cut sheets
FYIFF - SPRAY FLAMMABLE FINISH - GENERAL - Electrical Wiring and Equipment. Electrical wiring and equipment shall be in accordance with 2009 IFC Chapter 15 and the Electrical Code. ***Electrical Division of PPRBD has approved/released for permit this plan set.
FYISPRAY BOOTH AND CABIN CUT SHEET SPECIFICATION INFORMATION MANUFACTURER: SPRAY ZONE MANUFACTURING CTOF CLOSED TOP OPEN FRONT spray booth pit style full downdraft
FYISPRAY BOOTH AND CABIN CUT SHEET SPECIFICATION INFORMATION AND CODE COMPLIANCE Based on the statement found on the cut sheet/spec sheets provided, the CTOF Spray Booth conforms to the requirements of: NFPA 33, 86, 91, 101, 70 OSHA, BOCA, UFC, UBC, SBCCI Note: The CSFD adopted the IFC 2009 Mfgr. should update inforamtion to declare conformance with the IFC or "I Codes." CABIN statement includes above codes and standards plus the following: IFC, IBC, IMC, SBCCI
FYIELECTRICAL WIRING AND EQUIPMENT Areas subject to overspray deposits: Electrical equipment near spraying areas located such that deposits of combustible residues couldreadily accumulate thereon shall be specifically approved for locations containing deposits of readily ignitable residue and explosive vapors. EXCEPTIONS: 1. Wiring in rigid conduit, boxes or fittings not containing taps, splices or terminal connections. 2. Equipment allowed by the Fire Code Areas NOT subject to overspray deposits. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area shall be of an explosion-proof type approved for use in a Class I, Division 1 hazardous location in accordance with the Electrical Code. Electrical wiring, motors and other equipment located outside of, but within 20 feet of, a spraying area and not separated from the spraying area by partitions shall not produce sparks under normal operating conditions. Electric lamps in such areas shall be totally enclosed to prevent the falling of hot particles and shall be protected from physical damage by suitable guards or by location. Such areas shall be considered a Class I, Division 2 hazardous location in accordance with the Electrical Code. PORTABLE ELECTRICAL LAMPS - shall not be used in spraying areas during spraying operations. Lamps, if used during cleaning or repair operations shall be of a type approved for hazardous locations. GROUNDING Metal parts of spray booths must meet the requitrements of the Electrical Code.
FYIINTERIOR SURFACES of spray booths shall be smooth and continuous without edges and otherwise designed to prevent pocketing of residue, to allow free passage of exhaust air from all parts of the interior and to facilitate washing and cleaning without injury. FLOORS of spray booths shall be of noncombustible material or shall be covered with a noncombustible, non-sparking material of such character to facilitate safe cleaning and removal of residue. BAFFLE PLATES, if installed, shall be of a noncombustible material readily removable or accessible to facilitate cleaning and designed to provide an even flow of air through the booth and to prevent the deposit of overspray before it enters the exhaust duct. Baffle plates shall not be installed in the exhaust ducts. DEFLECTORS must be installed into spray booths having a frontal area of more than 9 square feet and not equipped with doors. A metal deflector or fire curtain not less than 41/2 inches deep must be installed at the upper outer edge of the booth over the booth opening.
FYI(PAINT BOOTH) MAKE-UP AND EXHAUST AIR: Air make-up systems and spray area exhaust systems shall remain functioning during any fire alarm condition. Exception: Where the type of automatic fire protection system requires air shut down Exception: Powder-coating systems. (NFPA 33:9.3)
FYI(PAINT BOOTH) AUTOMATIC SPRINKLERS: Sprinklers shalla be permittd to be covered by cellophane bags having a thickness of 0.08mm (0.003 in) or less or by thin paper bags. These coverings shall be replaced frequently so that heavy deposits of residue do not accumulate. (NFPA 33:9.4.7.1)
FYI(PAINT BOOTH) DRY CHEMICAL FUEL SHUT-OFF: Where systems protect hazards that are normally heated, the power or fuel supply to heaters shall be shut off automatically upon actuation of the extinguishing systems. Where systems protected hazards that have flowing flammable or combustible fluids or gases, the system shall be provided with automatic means to ensure shuroff of power and fuel valves upon operation of the extinguishing systems. All shutoff systems shall require manual resetting. (NFPA 17:5.5.1-2)
FYIFF - SPRAY FLAMMABLE FINISH - GENERAL - For permits for spraying or dipping operations utilizing flammable or combustible liquids, or the application of combustible powders regulated by 2009 IFC Chapter 15 and NFPA 33 Standard for Spray Application Using Flammable & Combustible Materials, current edition.
FYIFF - SPRAY FLAMMABLE FINISH - GENERAL - Smoking shall be prohibited in spray-finish-ing areas and in the vicinity of dip tanks. NO SMOKING signs with lettering of approved size shall be conspicuously posted in such areas.
FYIFF - SPRAY FLAMMABLE FINISH - GENERAL - Storage, Use and Handling of Flammable and Combustible Liquids. The storage, use and handling of flammable and combustible liquids shall be in accordance with 2009 IFC Chapters 15, 27 and 34.
FYIFF - SPRAY FINISH - GENERAL - Location of Spray-finishing Operations. When conducted in buildings used for assembly, educational, institutional or residential occupancies, spray-finishing operations shall be located in a spraying room protected with an approved automatic sprinkler system and separated vertically and horizontally from other areas in accordance with the Building Code. In other occupancies, spray-finishing operations shall be conducted in a spray booth, spraying area or spraying room approved for such use. Limited spraying areas for touch-up or spot painting may be approved, provided they meet the requirements of 2003 IFC Chapter 15. Provide bulding plan sheets with building approvals.
FYIFF - SPRAY BOOTHS - USING DRY FILTERS GENERAL - Spray booths using dry filters and dry filter rolls and the use and handling of such filters shall be in accordance with the fire code. MAINTAINING AIR VELOCITY in a spray booth equipped with a filter roll which is automatically advanced when the air velocity is reduced to less than 100 lineal feet per minute shall be arranged to cause shut down of spraying operations if the filter roll fails to automatically advance. Visible gages or audible alarm devices shall be installed to indicate that the required air velocity is maintained in accordance with fire code. FILTER DISPOSAL- all dirty filters shall be immediately removed to a safe, well-detached location or placed in a water-filled metal container and disposed of at the close of each day's operation. FILTER OBSTRUCTION - insure all articles being sprayed shall be positioned in a spray booth in a manner which does not obstruct collection of overspray. SPONTANIOUS IGNITION - spray booths using dry filters shall not be used for spraying materials which are known to be highly susceptible to spontaneous heating and ignition. Filters shall be changed prior to spraying materials which could react with other materials previously collected. Examples of potentially reactive combinations include lacquer when combined with varnishes, stains or primers. FILTER MATERIAL - clean filters shall be noncombustible or of an approved type. *** Cut sheets indicate this is a downdraft system with a full-filtered ceiling and a Controlled air flow ceiling, high efficiency recirculating heat system
FYIFF - SOURCES OF IGNITION - GENERAL - Open-flame and spark-producing equipment shall not be located in spraying areas and shall not be located with-in 20 feet of spraying areas unless separated by a partition. EXCEPTION: Equipment allowed by the fire code. HOT SURFACES - Space-heating appliances, steam pipes and hot surfaces shall not be located in spraying areas where deposits of combustible residues could readily accumulate.
FYIFF - SOURCES OF IGNITION - INSIDE SPRAY AREAS and VAPOR SPACES (See 03 IFC Section 1503) Electrical wiring/equipment shall be of explosion proof type approved for use in such locations. Such areas will be considered to be Class I, Division I (or) Class II, Division I in accord with the current Electrical Code. Electrical equipment inside spraying areas subject to accumulation of deposits of combustible/ignitable residues and exposure to explosive vapors shall be specifically approved for such use in accord with the current Electrical Code. Exceptions: 1. Wiring in rigid conduit, 2. boxes not containing taps, splices or terminal connections, 3. Equipment as allowed by Sections 1504, 1506 & Chapter 21 of the 03 IFC. FF- SOURCES OF IGNITION - AREAS ADJACENT TO SPRAY BOOTHS (See 03 IFC Section 1503) Electrical wiring/equipment outside of, but within 5 feet horizontally and 3 feet vertically of openings in spray booths or rooms shall be Class I, Division II or Class II, Division II
AttentionFF - SOURCES OF IGNITION - ADAJCENT TO SPRAY AREAS and VAPOR SPACES (See 09 IFC Section 1503) Electrical wiring/equipment outside of, but within 5 feet horizontally and 3 feet vertically of openings in spray booths or rooms shall be Class I, Division II or Class II, Division II Wiring shall conform to Electrical code requirements.
FYIFF - {VENTILATION OF SPRAY BOOTHS AND SPRAY AREAS} (PART 1) GENERAL - Spraying areas shall be provided with mechanical ventilation adequate to prevent the dangerous accumulation of vapors. Mechanical ventilation shall be kept in operation at all times while spraying operations are being conducted and for a sufficient time thereafter to allow vapors from drying coated articles and fin- ishing material residue to be exhausted. Spraying equipment shall be interlocked with the ventilation of the spraying area such that spraying operations cannot be conducted unless the ventilation system is in operation. Air exhausted from spraying operations shall not be recirculated. AIR VELOCITY - Ventilation systems shall be designed, installed and maintained such that the average air velocity over the open face of the booth, or booth cross section in the direction of airflow during spraying operations, shall not be less than 100 lineal feet per minute. INDEPENDENT DUCTS - Each spray booth shall have an independent exhaust duct system discharging to the building's exterior. EXCEPTION: Multiple cabinet spray booths having a combined frontal area of 18 square feet or less are allowed to have a common exhaust when identical spray-finishing material is used in each booth. If more than one fan serves one booth, fans shall be interconnected such that all fans operate simultaneously. FAN MOTORS AND BELTS - Electric motors driving exhaust fans shall not be placed inside booths or ducts. Fan rotating elements shall be nonferrous or nonsparking or casings shall consist of or be lined with such material. Belts shall not enter ducts or booths unless belts and pulleys within a duct or booth are tightly enclosed.
FYIFF - {VENTILATION OF SPRAY BOOTHS AND SPRAY AREAS} - (PART 2) DUCT MATERIAL AND TERMINATION POINT- Exhaust ducts shall be constructed of steel having a thickness in accordance with the Fire Code. The termination point for exhaust ducts discharging to the atmosphere shall not be less than the following: 1. Ducts conveying explosive or flammable vapors, fumes or dusts: 30 feet from property line; 10 feet from openings into the building; 6 feet from exterior walls or roofs; 30 feet from combustible walls or openings into the building which are in the direction of the exhaust dis- charge; 10 feet above adjoining grade. 2. Other product-conveying outlets: 10 feet from property line; 3 feet from exterior wall or roof; 10 feet from openings into the building; 10 feet above adjoining grade. 3. Environmental air duct exhaust: 3 feet from property line; 3 feet from openings into the building MINIMUM THICKNESS OF EXHAUST DUCTS - per tables in Fire Code. CLEARANCES BETWEEN DUCTS AND COMBUSTIBLE CONSTRUCTION GENERAL. Exhaust ducts shall have a clearance from combustible construction or material of not less than 18 inches unless protection of exposed surfaces is provided in accordance with the Fire Code. PROTECTED COMBUSTIBLE CONSTRUCTION - When combustible construction is provided with the following protection applied to all surfaces within 18 inches of the exhaust duct, clearances shall not be less than those indicated: 1) 0.013-inch (28 gage) sheet metal on 1/4-inch insulating millboard .......12 inches. 2) 0.013-inch (28 gage) sheet metal on 1/8-inch insulating millboard spaced out 1 inch on noncombustible spacers .........9 inches 3) 0.027-inch (22 gage) sheet metal on 1-inch rockwool batts reinforced with wire mesh or the equivalent ......... 3 inches
FYIFF - {VENTILATION OF SPRAY BOOTHS AND SPRAY AREAS} - (PART 3) PRODUCT-CONVEYING SYSTEM INTAKE - The mechanical ventilation system shall have air intake ducts extended to pick up flammable vapor within 6 inches of the floor. DUCT BENDS - Exhaust ducts shall not include individualbends exceeding 45 degrees measured from the center line of the duct. Bends, turns and elbows in ducts and pipes shall be constructed in a manner which does not reduce the cross-sectional area of the duct or pipe. CLEANOUTS - Cleanout openings shall be provided at intervals which allow thorough cleaning of ducts. Cleanout openings in ducts and pipes shall be equipped with tightfitting sliding or hinged doors constructed of metal which is equal to or greater than the thickness of the duct or pipe. Such doors shall be equipped with a substantial latch to hold the door tightly closed. INTERLOCKS - The spray mechanism shall not be able to function without the ventilation system on and the booth doors closed.
FYIFF - STORAGE, USE, AND HANDLING OF FLAMMABLE AND COMBUSTIBLE LIQUIDS GENERAL - The storage and handling of flammable and combustible liquids shall be in accordance with the 2009 IFC. STORAGE - Where the quantity of liquid in 5-gallon and smaller containers, other than original sealed containers, exceeds a total of 10 gallons, such liquids shall be stored in a storage cabinet, liquid storage room or a room or building for using, dispensing and mixing liquids in quantities exceeding exempt amounts. See Fire Code. Open containers and glass containers shall not be used. HANDLING - Original closed containers, approved portable tanks, approved safety cans or a properly arranged system of piping shall be used for bringing flammable or combustible liquids into spray-finishing areas. USE - Containers supplying spray nozzles shall be of a closed type or provided with metal covers which are kept closed. Containers not resting on floors shall be on noncombustible supports or suspended by wire cables. Containers supplying spray nozzles by gravity flow shall not exceed 10 gallons capacity. VALVES - Containers and piping to which a hose or flexible connection is attached shall be provided with a shutoff valve at the connection. Such valves shall be kept shut when hoses are not in use. IGNITION SOURCES - Heaters shall not be located in spray booths or other locations subject to accumulation of deposits or combustible residue PUMPED LIQUID SUPPLIES - If flammable or combustible liquids are supplied to spray nozzles by positive displacement pumps, pump discharge lines shall be provided with an approved relief valve discharging to pump suction or a safe detached location. LIQUID TRANSFER - When a flammable mixture is transferred from one portable container to another, a bond shall be provided between the two containers. At least one container shall be grounded. Piping systems for Class I and Class II liquids shall be permanently grounded.
FYIFF - {OPERATIONS AND MAINTENANCE} - (PART 1) GENERAL - Spraying areas shall be kept free from the accumulation of deposits of combustible residues, as practical, with cleaning conducted daily if necessary. TOOLS - Scrapers, spuds or other tools used for cleaning purposes shall be constructed of nonsparking materials. RESIDUE - Residues removed during cleaning and debris contaminated with residue shall be immediately removed from premises and properly disposed of. USE OF SOLVENTS - Class I liquids. GENERAL - Class I liquids used as solvents shall be used in spray gun and equipment cleaning machines which have been listed and approved for such purpose or shall be used in spray booths or spraying rooms in accordance with the Fire Code. LISTED DEVICES - Spray gun and equipment cleaning machines shall be located in areas not open to the public and shall be separated from ignition sources in accordance with their listings or by a distance of 3 feet, whichever is greater. The quantity of solvent used in a machine shall not exceed the design capacity of the machine. Within spray booths and spraying rooms. When solvents are used for cleaning spray nozzles and auxiliary equipment, the ventilating equipment shall be operated during cleaning.
FYIFF - {OPERATIONS AND MAINTENANCE} - (PART 2) WITHIN SPRAY BOOTHS AND SPRAYING ROOMS - When solvents are used for cleaning spray nozzles and auxiliary equipment, the ventilating equipment shall be operated during cleaning. CLASS II AND III LIQUIDS - Solvents used outside of spray booths, spraying rooms or listed and approved spray gun and equipment cleaning machines shall be restricted to Class II and Class III liquids. ALTERNATE USE OF MATERIALS - Spray booths shall not be alternately used with different types of coating materials where the combination of the materials could be conducive to spontaneous ignition, unless all deposits of the first-used material are removed from the booth and exhaust ducts prior to spraying with the second material. WASTE RECEPTACLES - Approved metal waste cans shall be provided for rags and waste impregnated with finishing materials. Rags and waste impregnated with finishing materials shall be deposited in such waste cans immediately after use. The contents of waste cans shall be properly disposed of at least once daily and at the end of each shift.
FYIFF - {DRYING APPARATUS} - (PART 1) GENERAL - Drying apparatus shall be in accordance with the Fire Code and Article 62. SPRAY BOOTHS AND SPRAYING ROOMS GENERAL - Spray booths and spraying rooms shall not be alternately used for the purpose of drying by arrangements which could cause a material increase in the surface temperature of the spray booth or spraying room unless in accordance with the Fire Code. DRYING OPERATIONS GENERAL - Spray booths and spraying rooms used for spraying operations with drying conducted therein using drying apparatus shall be in accordance withThe Fire Code DRYING APPARATUS - Drying apparatus used in spraying rooms shall be of the portable infrared type. Drying apparatus used in spray booths shall be of the portable infrared type, or if other types of drying apparatus are used, the spray booth, including drying apparatus, shall be listed and approved for use with flammable vapors and combustible residues and shall be provided with explosion control. SPRAYING PROCEDURES - The spraying procedure shall use low-volume spray application. HOUSEKEEPING - The interior of the spray booth or spraying room shall be kept free of overspray deposits.
FYIFF - {DRYING APPARATUS} - (PART 2) INTERLOCKS - The spraying apparatus, drying apparatus and ventilating system for the spray booth or spraying room shall be equipped with suitable interlocks arranged to: 1. Prevent operation of spraying apparatus while drying operations are in progress, 2. Purge spray vapors from the spray booth or spraying room for a period of not less than three minutes before drying apparatus can be operated, 3. Have the ventilating system maintain a safe atmosphere within the spray booth or spraying room during the drying process and automatically shut off drying apparatus in the event of a failure of the ventilating system, and 4. Automatically shut off the drying apparatus if the air temperature within the booth exceeds 160 F when other than portable infrared drying apparatus is used. PORTABLE INFRARED APPARATUS - When portable infrared drying apparatus is used, electrical wiring and portable infrared drying equipment shall comply with Article 45 and the Electrical Code. Electrical equipment located within 18 inches of floor level shall be approved for Class I, Division 2 hazardous locations. Metallic parts of drying apparatus shall be properly electrically bonded and grounded. During spraying operations, portable drying apparatus and electrical connections and wiring thereto shall not be located with- in spray booths, spraying rooms or other areas where spray residue could be deposited thereon. SPRAYING AREAS - Drying or baking units using a heating system having open flames or which could produce sparks shall not be installed in a spraying area. When such units are installed adjacent to a spraying area, they shall be equipped with an interlocked ventilating system arranged to: 1) Thoroughly ventilate the drying space before the heating system can be started, 2) Maintain a safe atmosphere at any source of ignition, and 3) Automatically shut down the heating system in the event of a failure of the ventilating system.
FYI(STANDARD COMMENT) PAINT BOOTH - SCHEDULING INSPECTIONS: Please call the Office of the Fire Marshal at 385-5978 to schedule your suppression system inspection for Paint Booths. A Hazardous Materials Fire Inspector will complete the inspection process.


 

Contact Us: Email Us - Call: 385-CITY (719-385-2489) - RSS - Privacy, Linking and ADA Policies - designed, developed by projecta.com

printer friendly version Printer friendly version