||FYI||*****(STANDARD COMMENT 1) This project is: Private Residence, 2560 Mirror Lake Ct: single family home - WALDO REBUILD
Date of Plans: 1.9.13
You can access our web site for the latest fire department plan review comments:
1. From www.pprbd.org, select PLAN REVIEW then FIND PLANS next COLORADO SPRINGS
2. Scroll down to the correct address. You may then select APPROVED/DISAPPROVED to view comments associated with that particular project.
|Recommendation||The use of gable attic venting is not recommended on the backside of the structure as it will not withstand an ember storm as easily as roof/soffit venting combination will. the gable vent is acceptable on the street side, as an ember storm approaching from that side is much less likely over the life of this home.
The use of wood product for fascia and soffits is not recommended as it will not resist ignition as well as a cementous product will.|
|FYI||(STANDARD COMMENT) 150-FT ACCESS
Fire apparatus access roads shall be provided for every structure constructed or moved into or within the jurisdiction and shall be extended to within 150-feet of all exterior portions of the first story of any building. (2009 IFC §503.1.1)|
|FYI||(STANDARD COMMENT) ADDRESSING
Address shall be posted on street addressed side of structure. Minimum 5" numbers with 1/2" stroke. Contrasting color to background. (2009 IFC 505.1)|
|FYI||(STANDARD COMMENT) INCREASED WILDFIRE RISK.
Residing in or near the hillside overlay or wildland-urban interface areas involves increased fire risks that may not apply in urban or more urbanized types of developed communities.|
|Recommendation||(STANDARD COMMENT) FUELS MANAGEMENT
Brush patches or clusters may be left in the safety zone, but should be separated by clear areas of 10-feet or more of noncombustible materials or grass mowed to not more than 4-inches in height.
CLEARANCE TO MAIN STRUCTURE:
No combustible brush, trees or shrubs should be left, planted or allowed to grow within 15-feet of the main structure or significant accessory structure such as sheds, decks and pergolas. The trunks of deciduous trees may be planted as close as 10-feet from structures.
Small brush patches not exceeding 100-square feet in size or trees no larger than 15 linear feet in any direction should be allowed to encroach into this zone.
PRUNING OF LIMBS:
Large trees should not be allowed to have limbs overlap smaller trees or brush, creating ladder fuels, and should be pruned of limbs to a height up to 10-feet while maintaining a minimum 70% of the tree's crown. Certain tree clusters may be permitted if sufficient clear area is provided.
CLEARANCE OF TREE BRANCHES TO STRUCTURES OR APPURTENANCES:
Character tree branches should not extend over or under the roof or eaves, and the canopy or drip-line should not be within 15-feet of a deck or similar combustible projection, wood burning appliance or chimney.
For additional information - contact our Wildfire Mitigation Admnistrator at 385-7368 or www.springsgov.com/fire|
|Recommendation||(STANDARD COMMENT) IGNITION-RESISTANT CONSTRUCTION is recommended for use in all homes constructed within the Hillside.
1. Exterior cladding, eaves and soffits should be constructed of ignition resistant materials, including but not limited to: fiber-cement board, stucco, masonry/brick, manufactured stone and similar materials. Natural wood/cedar siding, hardboard, vinyl and similar combustibles should not be used. Natural wood or plastic products used for fascia, trim board materials and trim accents are recommended to be painted.
2. For any portion of the attached structure with projections or overhangs, the area below should have all horizontal under-floor areas enclosed with ignition resistive materials such as described in item 1 above.
3. Exterior doors should be noncombustible or solid core not less than 1 3/4-inches thick. Windows within doors and glazed doors should be tempered safety glass or multi-layered glazed panels.
4. Exterior windows should be a minimum double pane. Tempered panes are preferred.
5. All attic vents should be screened with wire mesh or hardware cloth having openings no larger than 1/8-inch. Soffit vents are preferred, gable vents are not recommended.
6. Gutters and downspouts of non-combustible construction should be installed such that the leading edge of the roof is finished with a metal drip edge so that no wood sheathing is exposed. The drip edge should extend into the gutter. Vinyl gutters should have a noncombustible landing area below the roof line, a minimum of 5-feet from the side of the structure/foundation.
7. Decks and other habitable spaces should be of ignition resistant or non-combustible decking materials, such as metal or composite materials.
8. The base of exterior walls, posts or columns should be protected on the bottom side with provisions such as fire resistant foam or wire mesh having openings no larger than 1/8-inch.
9. Chimneys serving fireplaces, and other solid or liquid fueled heating appliances should have an approved spark arrestor or cap.|
|Recommendation||(STANDARD COMMENT) CONSTRUCTION PERMIT REVIEW REQUIREMENTS:
Plans for any structure lying within the Hillside Overlay area must be approved by the Colorado Springs Fire Department Construction Services prior to issuance of a building permit.
Final approval by CSFD on all permits issued by RBD is required prior to issuance of the Certificate of Occupancy.|
|FYI||(STANDARD COMMENT) CLASS A ROOFING
A Class A roof covering (excluding solid wood roofing products) shall be installed on all Residential Occupancies and a minimum Class B roof covering shall be installed on all remaining occupancies (Not to replace Class A where already required by Table 15-A) at the time an application is made for a roofing or re-roofing building permit within the limits of the City of Colorado Springs, Colorado.|
|FYI||(STANDARD COMMENT) FIRE EXTINGUISHERS
A single, (1), 2A-10B:C fire extinguisher is required in all homes & town homes. It's ok to hang under a kitchen sink, in a closet, or in an ATTACHED garage, so long as it's accessible.
|FYI||(STANDARD COMMENT) PERMITS
Insure all applicable permits are obtained from the Regional Building Department and the Colorado Springs Fire Department for the work that is being done at this site.
|FYI||(STANDARD COMMENT) REVIEWS:
Colorado Springs Fire Department plan reviews are based upon information provided on the drawings and/or the attached reference material. Issues or features that are not presented within the construction documents are assumed to be complaint with applicable codes/standards. It is the responsibility of the building owner to ensure that minimum code requirements are met as established by the Authority Having Jurisdiction, whether or not the requirements are specifically indicated on the submitted construction documents.
The CSFD has reviewed the submittal in accordance with the adopted fire code requirements, CSFD local amendments, City Code Standards, and applicable NFPA Standards. All plan review comments are subject to final on-site field inspections, and testing by the CSFD. Review and approval by the CSFD shall not relieve the applicant of the responsibility of compliance with the International Fire Code.
|FYI||(STANDARD COMMENT 10) INSPECTIONS
Due to the dynamic nature of inspectors schedules, PLEASE call your inspection requests in with ample time to allow scheduling.
When calling, please have your complete CSFD plan review number(s) ready for each inspection request.
( i.e. 20001234 - HM -2 or 20000012 - CN - 1)
The CSFD Approved sets of plans are to be on site for all inspections.
|FYI||(STANDARD COMMENT) WALDO CANYON REBUILD INSPECTIONS
Two inspections are required for the homes undergoing rebuild due to the Waldo Canyon Fire. You will need to schedule an inspection at the time of Framing and a final inspection near completion.|
|FYI||(STANDARD COMMENT) SCHEDULING INSPECTIONS:
Please call 719-385-5982 Extension 2 to schedule all construction related inspection activities.|